ELERIX 24V/100Ah, 2.4 kWh LiFePO4 Set With EX-L100K Cells

ELERIX 2,4kWh LiFePO4 set (24V) with 100Ah cells + accessories.
Highly energy-efficient Lithium cell, original product from ELERIX Battery with LiFePO4 technology.

An industrial lithium cell with high energy density and a capacity of 100 Ah, based on safe LiFePO4 technology. The battery is made of high quality materials and contains no toxic chemicals, guaranteeing a long service life.

LiFePO4 is a very safe technology, without spontaneous combustion, fire and explosion. The self-discharge rate is very low. There is no memory effect - cells can be recharged in any state of discharge.
All ELERIX cells are thoroughly tested in Tier 1 factories prior to distribution, including during production and prior to shipment. The ELERIX brand is distinguished by the high quality of its cells, which are primarily Class A.

Set Contents

8× ELERIX EX-L100K

1× ELERIX GWL-M6L (M6×12)

7× ELERIX EX-TC50/6

7× ELERIX EX-SEP-KT

Industrial Lithium cell with high energy density and a capacity of 100 Ah, is made using LiFePO4 (LFP) technology. The battery is made of high-quality materials and contains no toxic chemicals, ensuring a long lifespan.

All ELERIX cells are thoroughly tested in Tier 1 factories before distribution, including during production and before shipment. The ELERIX brand is distinguished by the high quality of its cells, which are primarily class A.

• High production quality and long lifespan
• Small and lightweight cells
• Suitable for electric vehicles, light applications, energy storage, and solar applications
• Free of toxic chemicals
• Aluminum casing
• High performance up to 1 C, discharging 100 A
• Lithium iron phosphate - LiFePO4 (LFP, lifepo4)
• 3000 cycles / 15 years calendar lifespan
• Provides high currents during peak discharge (2 C, 200 A)
• Operating temperature 0 to +50 °C (charging)
• Suitable for electric vehicles, applications requiring low weight, energy storage, and solar applications

How to connect cells

8 cells, 24V
Total capacity 2400 Wh / Depth 390 mm / Weight 18.4 kg

See another option of using long and short connectors for EX-L100K

Discharge test
The following graph shows the discharge capacity test + 1C discharge current in the voltage range of 2.15 V – 3.35 V.

Operating Instructions

• The cell must always be fully charged before first use
• Initial charging must be done with a low current at max. 0.5C - i.e., 50 A for a 100 Ah cell
• Cell terminals must be protected against contamination, damage, and short-circuiting
• Cells must be monitored and protected against deep discharge and overcharging
• Charging and discharging must be supervised

Initial Charging
Cells are pre-charged by the manufacturer to a conservation charge (usually 30-50%). Before first use, the cells need to be charged with a low current. The first charge should not exceed 0.5 C - i.e., 50 A for a 100 Ah cell.

When first charging multiple cells, connect them in parallel, and the charger outputs should be connected to both ends of the parallel cell arrays.
We recommend using chargers specially designed for LiFePO4 cells. The first charge and initial balancing of the entire set is an important step to achieve a long lifespan.

BASIC SPECIFICATIONS

Technology: lithium (LiFePO4)
Capacity: 100 Ah
Nominal voltage: 3.2 V
Operating voltage: 2.5-3.65 V
Maximum charging voltage for initial charge: 3.65 V
Peak discharge current: 200 A (max. 30 s)
Energy density: 139 Wh/kg
Dimensions: 173 × 138 × 48 mm