Solarmi Island Power Supply XtendLAN Offgrid 24/48AT20AGM - assembled box

Outdoor waterproof box including pole mount bracket. The box is equipped with everything necessary for powering devices in locations without electrical connection.
This off-grid power supply is designed for 24 V or 802.3af/at 48 V PoE systems, such as powering outdoor elements like IP cameras, LTE/Wi-Fi links, etc. The box is equipped with PG11 cable glands.

The box can be supplemented with solar panels or a power source that is powered from a street lighting lamp. Consult with us about suitable power sources and solar panels.

The main advantage of this assembled box is the use of OTL series traction gel batteries and an industrial injector for power over Ethernet cable. This is a sealed lead-acid battery in VRLA design. It is a construction in which internal pressure regulation occurs via valves (VRLA - valve regulated lead acid). GEL technology means that the battery does not contain electrolyte in liquid state. The electrolyte is solidified in a hybrid gel (combination with AGM), and is thus firmly bound inside the battery cells, thereby preventing its leakage. Extra strong cell grid ensures high cyclic durability of the battery.

The total battery capacity used is 480 Wh, which is sufficient to power a device with 20 W power consumption for 20 hours.

BASIC SPECIFICATIONS

Enclosure (WE-402150)

Protection rating: IP66
Dimensions: 500 × 400 × 210 mm
Door seal: polyurethane foam
Color: grey, RAL7032

Battery (GOOWEI ENERGY OTL20-12) (2×)

Technology: VRLA GEL (lead-acid battery)
Voltage: 12 V
Capacity: 20 Ah
Operating temperature range: -15 to +40 °C
Number of operating cycles: approximately 800 cycles
Dimensions: 181 × 167 × 77 mm

Controller (EPEVER XTRA1210N-XDS2)

Nominal system voltage: 12/24 V DC or auto
Battery input voltage range: 8–32 V
Battery type: lead-acid, lithium-ion
Rated charging/discharging current: 10/10 A
Max. PV open circuit voltage: 100 V (92 V at approx. 25 °C)
MPPT efficiency: ≥ 99.5 %
Conversion efficiency: max. 98 %
Dimensions: 175 × 143 × 48 mm
Weight: 0.57 kg

PoE injector Planet IPOE-162

Interface: 2× RJ-45 10/100/1000 Mbps: 1× Data input, 1× PoE (Data + Power) output
Total power output: up to 30 W, IEEE 802.3at
Port load capacity: up to 30 W
Power supply: 24–48 V DC/24 V AC (power source not included)
Operating temperature: -40 to +75 °C
Dimensions: 135 × 87.8 × 32 mm
Weight: 473 g

Unassembled enclosure:

This assembly consists of products under these codes:

SOPGWL0017 - Solar cable 1500V/25A, 1m (cross-section 2x 4mm)
ELEGWL0018 - RSA terminal block strip designed for connecting low voltage electrical circuits
ELEGWL0019 - End partition for RSA type terminal blocks
ELEGWL0022 - Crimp ferrule DI 6-12 with insulation
NETXTE7150 - Mounting kit for pole mounting of enclosure
ELEGWL0005 - MEGA fuse, 100A, M8
ELEGWL0016 - DIN rail for mounting modular devices
NETPLA1705 - Planet IPOE-162 PoE injector IEEE802.3at, 30W, IP30, 12-48VDC
NETXTE3483 - Wall-mount enclosure, 400x210x500, IP66, mounting plate, grey
NPCGWL0003 - DC cable for battery connection, 15cm, 2x ring terminal M6
NPCGWL0006 - DC connection cable, 60cm, ring terminal M6 - ferrule
NPOWAC0004 - Cable gland Pg11
SOPGWL0048 - Solar MPPT controller 12/24 V
UPSGOE0007 - Lead-acid 12V, 20Ah battery in VRLA GEL design designed for deep discharge and cyclic operation