EPEVER TRC3210 MPPT Solar Regulator 30A, 12/24V, Input 100V, RV

Advanced MPPT controller with a maximum tracking efficiency of 99.5% and a conversion efficiency of 98.4% for efficient battery charging from solar panels.

The TRC3210 controller from the TRC series utilizes a new generation MPPT algorithm that significantly improves tracking accuracy and response speed, reduces power losses, and increases DC/DC conversion efficiency. It supports automatic 12/24 V battery voltage detection and allows direct load powering via the battery port when sufficient power is available from solar panels, thanks to the battery-free mode.

The low power consumption design significantly reduces standby mode consumption to less than 10 mA and extends standby duration. The controller offers flexible communication interfaces with three optional combinations: 2× RS-485, RS-485 + CAN (RV-C), and RS-485 + LIN (CI-BUS). Isolated RS-485 interface and short-circuit protection enhance system reliability. Optional 4G/Wi-Fi modules enable remote monitoring, and the communication port can be enabled or disabled as needed.

Wide Battery Compatibility
The system supports various battery types including LiFePO4, AGM, Gel, and flooded batteries. Stable automatic activation of lithium batteries ensures reliable operation even at low state of charge.

Operating Conditions
The controller operates in a temperature range of -30°C to +60°C without power derating at temperatures up to 40°C. IP32 protection rating is suitable for installation in sheltered environments. Maximum altitude without power derating is 2,000 m; above this value, power derating is required.

KEY SPECIFICATIONS

Maximum open-circuit voltage: 100 V (at lowest temperature), 92 V (at 25°C)
MPPT voltage range: (battery voltage + 2 V) to 72 V
Rated battery voltage: automatic detection 12/24 V
Charging current: 30 A
Discharging current: 30 A
Maximum charging power: 390 W at 12 V, 780 W at 24 V
Output voltage range: 8–31 V
Standby consumption (communication on): 12 V/21 mA, 24 V/12 mA
Standby consumption (communication off): 12 V/7 mA, 24 V/4 mA
Maximum conversion efficiency: 98.4%
Communication: CAN (RV-C protocol), RS-485 (5 VDC/200 mA), LIN (CI-BUS COM protocol)
Operating temperature: -30 to +60°C (no power derating up to 40°C)
Storage temperature: -40 to +70°C
Relative humidity: ? 95% (non-condensing)
Protection rating: IP32
Dimensions: 178 × 168 × 71.5 mm
Weight: 1.2 kg