Victron VE.Bus BMS NG
(Code:SOPVIC0056)
| Stock availability: | ||
|---|---|---|
| Main warehouse | External warehouse | External warehouse 2 |
| Usual availability approx 5 days | ||
| List price: | 148.47 EUR |
|---|---|
| Status: To order | |
| Code | SOPVIC0056 |
| PN | BMS300200300 |
| EAN | 8719076063520 |
| Warranty | 12 months |
| Support | fotovoltaika@100mega.cz |
| Brand |
VICTRON
Victron Energy B.V.
De Paal 35, 1351 JG Almere, Nizozemsko
lpopescu@victronenergy.com
www.victronenergy.cz
|
Victron VE.Bus BMS NG
The VE.Bus BMS NG system represents the latest generation of battery management solutions from Victron Energy, specially developed for controlling and protecting Lithium NG (LiFePO4) batteries. It supports battery pack configurations with various voltage levels (12.8 V, 25.6 V, 51.2 V) and capacities, both in parallel and series connection, allowing scaling up to a total capacity of 384 kWh. The system provides reliable protection against under/overvoltage, overheating or overcooling of cells, and automatically disconnects the load or charging device if necessary.
Advantages:
- Bluetooth Smart: wireless setup, monitoring, and firmware updates via the VictronConnect app.
- Load Disconnect: disconnects the load when cell undervoltage occurs, compatible with BatteryProtect and other devices with remote on/off function.
- Charge Disconnect: disconnects chargers in case of overvoltage or unsuitable battery temperature.
- Early undervoltage warning: activates LED, buzzer, or relay 30 s before load disconnection.
- Remote on/off input: simultaneously turns off both the load and chargers when the off signal is received.
- LED indication: Bluetooth status, warnings and errors, VE.Bus status.
- Communication with VE.Bus devices: controls the status of inverters and chargers such as MultiPlus, Quattro, etc.
- Communication with remote devices: through the Remote panel port, it is possible to connect Cerbo GX, Digital Multi Control, or VE.Bus Smart dongle.
- Power and auxiliary inputs/outputs: dedicated GX-Power output for powering GX devices and Aux-In input.
The device is intended exclusively for use with Victron Lithium NG batteries and is not compatible with older Lithium Smart models without the NG designation.
BASIC SPECIFICATIONS
Input voltage: DC 9–70 V
Consumption: 10 mA / 2 mA / 1.5 mA
GX-Power output: max. 1 A
Aux-In input: max. 1 A
Load Disconnect: max. 1 A (source current)
Charge Disconnect: max. 10 mA (source current)
Pre-alarm output: max. 1 A (not short-circuit protected)
VE.Bus interface: 2× RJ-45 (VE.BUS connection)
Operating temperature: -20 to +50 °C
Protection rating: IP20
Dimensions: 105.8 × 95 × 23.2 mm
Weight: 120 g
Example system with VE.Bus BMS NG, MultiPlus, and Cerbo GX

Example system with VE.Bus BMS NG, alternator, starter battery, Cyrix-Li-ct, BatteryProtect, DC loads, and MultiPlus

| Brand | |
| Type specification: | Electrical accessories up to 1kg |
| Manufacturer: | VICTRON |
| Technical specification | |
| Max. operating temperature (°C): | 50 |
| Min. operating temperature (°C): | -20 |
| Power supply | |
| Rated Voltage (V): | 9 - 70 (DC) |
| Physical properties | |
| Depth (mm): | 105.8 |
| Weight (kg): | 0.12 |
| Dimensions: | 105,8 × 95 × 23,2 mm |
| Width (mm): | 95 |
| Height (mm): | 23.2 |
Vložte požadované množství do košíku a zjistěte vypočtenou cenu dopravy.
-
Unknown availability
Vložte požadované množství do košíku a zjistěte vypočtenou cenu dopravy.
-
Unknown availability
Vložte požadované množství do košíku a zjistěte vypočtenou cenu dopravy.
Product price timeline.
Logistics parameters
- Weight: 0.22 kg
- Width: 11 cm
- Height: 3 cm
- Depth: 10 cm
- Volume: 330 cm3
- Qty: 1 ks



Personal pickup
TNT Carrier