Solarmi watter heating system 3.6kWp Mono black, 4kW Inverter

Set for photovoltaic water heating.

The set includes Solar inverter GETI GWH01, which allows for the direct use of photovoltaic panel systems to power resistive heating devices, such as electric boilers, heaters, heating mats, water heaters, etc. Additionally, the inverter is equipped with an AC input, allowing connection to the mains voltage and water heating even when solar radiation is insufficient for heating.

Save costs and heat water using solar energy today. Thanks to the Solar inverter GETI GWH01 with automatic switching to the grid, you can significantly reduce your costs for heating hot water.

How does it work?
The system is simple, requiring only the connection of the appropriate number of photovoltaic panels with a maximum power of 4000 W with operating voltages of 160–350 V DC, mains voltage of 230 V AC, and connection to resistive loads, such as heating coil, electric boiler, electric radiator, or underfloor heating and protection devices.
The direct current generated in the panels, which cannot be directly supplied to heating devices, is converted into alternating current in the converter, which can be used to power heating devices.
The maximum system power is 4000 W. The inverter has a priority input from the photovoltaic panels, and when this voltage drops below 120 V, the water heating will be supplied from the mains voltage of 230 V AC.

Warning:

The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat. It is not suitable for electronically controlled thermostats!

System components can be funded through the "Nová Zelená Úsporám" program and others.

For proper installation and operation, study the manuals for individual components of the assembly.

The set includes:

• 6× ELERIX ESM-600T Solar panel, Full Black, TOPCon N type, Mono, Half Cut, 600 Wp, 144 cells
• 1× Solarmi DS50PVS-500/G surge protector, 500Vdc, CE
• 1× GWL MC4 installation connector MC4, crimping, 2–6 mm, (set Male + Female)
• 1× Solarmi GETI GWH01 4000W MPPT inverter/regulator for solar water heating, 4 kW
• 2× Solarmi cylindrical fuse PV14 16A gG 690V 14X51
• 1× Solarmi OPVP14-2 63A fuse switch for photovoltaics, DC disconnect
• 20× GWL SC4-1M-2C solar cable 1500V/25A, 1 m (cross section 2× 4 mm)

Technical parameters:

• Input voltage (DC): 160–350 V
• Input voltage (AC): 230 V
• Output voltage [AC]: 0–260 V
• Maximum power: 4000 W
• Load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)
• Resistance load value must not be lower than 13 Ohm
• MPPT function: yes
• Connection of PV panels: serial or serial-parallel
• Priority input: PV panels
• Backup input: mains 230 V AC
• Operating temperature: -25 to + 55 °C
• Efficiency: > 99%
• Cooling: passive
• Protection against input short circuit
• Protection against overheating
• Input connection of PV panels: MC4 connectors
• Input connection 230 V AC: screw terminal
• Output connection 230 V AC: screw terminal
• Material: aluminum + metal

BASIC SPECIFICATIONS

Max. power: 4 kW
Input voltage: DC 160–350 V or AC 230 V
Output voltage: AC 0–260 V
Protection class: IP65
Dimensions: 250 × 155 × 80 mm
Weight: 3 kg