Victron SmartSolar 100/15 MPPT Solar Regulator

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48 V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.

Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm
See the software section on our website for details.

Day/night timing and light dimming option
See the software section on our website for details.

Fully discharged battery recovery function
Modern Apple and Android smartphones, tablets, macbooks and other devices: see the VE.Direct Bluetooth Smart dongle and the MPPT app discovery sheet for screenshots. ColorControl GX and other GX products.

SPECIFICATIONS

Battery voltage: 12/24 V Auto Select
Rated charge current: 15 A
Nominal PV power, 12 V: 220 W
Nominal PV power, 24 V: 440 W
Maximum PV open circuit voltage: 100 V
Max. PV short circuit current: 15 A
Maximum efficiency: 98 %
Weight: 0,6 kg
Dimensions: 113 x 100 x 50 mm

VictronConnect app:

VictronConnect app (Android)

VictronConnect app (Mac)

The application can also be downloaded from the Victron Energy website:
https://www.victronenergy.com/support-and-downloads/software#victronconnect-app

Configurator:
https://www.victronenergy.com/upload/software/VE-MPPT-Calc-2_4.xlsx