Lithium Battery LiFePO4 (12V/20Ah)

The most modern technology for storing electrical energy.
Lithium High Power 12 V Battery use LiFePO4 technology with capacity 20 Ah. Dimensions of battery 181 × 77 × 167 mm.

NOTE:
The monolithic 12 V batteries do not have any PCM (any electronics) inside. They consist of finely balanced cells with identical perfomace. The battery must be managed as a single monolithic 12V block.

Features

• Lithium iron phosphate (LiFePO4) technology.
• Contains no toxic substances, poisons, corrosives or acids.
• Completely safe: does not burn, explode, or contain liquid electrolyte.
• Low self-discharge (< 3% per month).
• Lifespan of at least 10 years.
• Does not contain a balancing system - cells are assembled according to precise capacity, operational voltage must be monitored as a whole.
• Charging and discharging at 1C.

The maximum charging voltage for initial charge is 15 V.
Recommended subsequent charging is to 14,8 V.
The minimum voltage is 11 V.
Maximum discharge current is 3C continously.

BASIC SPECIFICATIONS

Technology: lithium (LiFePO4)
Voltage: 12 V (nominal)
Capacity: 20 Ah
Operating voltage range: 11.5–14.8 V
Operating temperature range: -20 to +65 °C (discharging)
Number of operating cycles: up to 2000
Terminal screw tightening torque: 4 Nm
Dimensions: 181 × 167 × 77

Recommendation: always contact us before ordering this item to clarify technical specifications. We offer supplies of LFP batteries for industrial use, electric and traction vehicles, as well as for individuals, modelers, and experimenters.

Important information: these are special power cells for industrial use. Improper use can lead to irreversible damage to the cell. For this reason, only designated chargers should be used for charging. During discharge, it is necessary to prevent the cell from being completely discharged. The warranty on these cells applies only to manufacturing defects, not to damage caused by improper use.
Warning: these cells require a regulatory charger and monitoring unit for operation. Without these additional devices, the cell may be damaged.

If you are interested in these LiFePO4 cells, contact us by email for further arrangements. The stated price is the nominal price for 1 piece. For larger orders, projects, and special applications, it is possible to negotiate an individual price according to the number of units purchased. We also provide the supply of special cells according to customer requirements.

These batteries are suitable for all traction applications including electric vehicles. Fully complies also for stationary applications - such as energy storage.
Also possible to use for starting internal combustion engines. In the Principles do not require any special electronics for use LP 12V batteries for starting, but it is very important to keep min. and max. voltage, so we recommend using any voltage indication unit, which you will be informed about the current Voltage. This is important especially for frequent starting. We recomend use some simple car Voltmeter.
There is no Selfdischarging effect.
Can be recharged at any state of discharge - no memory effect.
LiFePO4 is a very safe technology, not spontaneous combustion, does not react with moisture or with oxygen.