Victron Blue Smart IP65s Charger 12/15 + DC connector

Product details Victron BlueSmart IP65 Charger

The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Optimal for batteries with a capacity of 80-180 Ah.

• Water, dust and chemical resistant
• Seven step smart charge algorithm
• Recovery of fully discharged ‘dead’ batteries
• Automatic power supply function
• Severe cold performance: down to -30 °C
• Several other battery life enhancing features
• Low power mode to charge smaller batteries
• Li-ion battery mode
• Setup and configure, readout of voltage and current by Bluetooth Smart

  

Ultra high efficiency “green” battery charger
NWith up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Reconditioning
Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.

Storage mode: less corrosion of the positive plates
Even the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.

Durable, safe and silent

• Low thermal stress on the electronic components.
• Protection against ingress of dust, water and chemicals.
• Protection against overheating: the output current will reduce as temperature increases up to 60 °C, but the charger will not fail.
• The chargers are totally silent: no cooling fan or any other moving parts.

Li-ion battery mode
The Blue Smart IP65 Charger uses a specific charging algorithm for Li-ion (LiFePO4) batteries, with automatic Li-ion under voltage protection reset.

Included in the package are power cables with M8 eyelets and croc-clamps. Cables with fuse and other accessories can be found in the related products.

SPECIFICATIONS

Efficiency: 94 %
Input voltage (AC): 180-265 V (45–65 Hz)
Charging current: 15 A
Charge voltage 'absorption': 14,4 V
Charge voltage 'float': 13,8 V
Charge voltage 'storage': 13,2 V
Standby power consumption: 0,5 W
Protection: Reverse polarity, Output short circuit, Over temperature
Battery-connection: Black and red cable of 1,5 meter
230 V AC-connection: Cable of 1,5 meter (CEE 7/7 (Schuko))
Protection category: IP65 (splash and dust proof)
Weight: 0,9 kg
Dimensions: 190 x 105 x 60 mm

---

Included in the package are power cables with M8 eyelets and croc-clamps. Cables with fuse and other accessories can be found in the related products.

---

---

VictronConnect app (Android)

VictronConnect app (iOS)

VictronConnect app (Mac)

The VictronConnect app (Mac/Windows/Linux/iOS/Android):
https://www.victronenergy.com/support-and-downloads/software#victronconnect-app

---